Chatillon Test Stand LTCM100 Series

This product is OBSOLETE, find the link to the replacement product below.


The LTCM Series are low cost, motorized testers optimized for product floor operation. When combined with a digital force gauge, they provide users with an easy-to-use testing system for tensile, compression, peel, and flexural testing applications.

The LTCM Series features a large working area and a 5-inch (130 mm) throat ideal for large sample sizes. The base features pre-drilled holes for fitting fixtures and jigs.

Crosshead travel is controlled from a simple console, or by using the optional footswitch controller. A digital display indicates the travel speed during the test. The return speed may be configured to automatically return at maximum speed. Mechanical deflection limits, located on the column face can be used to set travel limit setpoints. The crosshead will stop when either the upper or lower deflection limit is contacted.

The LTCM100 with a crosshead travel that extends to 15 inches (380 mm)

Speed may be set from 0.2 to 20 in/min or to 5 to 500 mm/min.



  • Tensile, Compression, Peal & Flexural Testing
  • Compact, Lightweight, Bench top Design
  • Simple Operation
    • Console Controls for Speed & Travel
    • Optional Foot switch Control
    • Independent Return Speed
  • Mechanical Deflection Limits
  • Digital Load Limits (With Chatillon DF/DF2 Gauge)
  • Large Working Area
  • 2 Year Warranty



  • Load Capacity
    • 100 lbf
  • Crosshead Speed
    • 0.2 to 20 in/min, 5 to 500 mm/min
  • Return Speed
    • 20 in/min, 500 mm/min
  • Speed Accuracy
    • ±3% o full scale unloaded
  • Travel Distance
    • 15 in
  • Load Measurement
  • Operating Termp.
    • 40 to 110°F
  • Instrument Weight
    • 40lb
  • Shipping Weight
    • 50 lb

Note: Weights are approximate

Download Data Sheet

Download Manual

You may also like…

  • Chatillon: Test Stand- LTCM500 Motorized Test Stand

    Chatillon Test Stand LTCM500 series

    Read more