Description

Features

Rigid and precise mechanical design

• Exceptionally rigid frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0.002 in / 0.05 mm under any load, at any position.Stepper motors and controllers drive a ballscrew and linear guideway for smooth, quiet operation, with virtually no speed variation under load.

Conveniently Modular

• Frame bases can be removed to accommodate column extensions and alternative mounting configurations. Most electronics are housed in a self-contained enclosure, easily accessed and replaced if needed. Integrated T-slots along the column accommodate add-ons.

External limit switches

• Solid-state upper and lower limit switches may be used as test limits or as test exceptions. Dual-graduated rulers aid in switch placement

Seamless force sensor interface

• Series FS05 smart force sensors mount directly to the crosshead of models F105, F305, F505, and F505H, without any connection cables. Ranges available from 0.12 to 500 lbF [0.5 N to 2.5 kN]. Accurate to ±0.1% of full scale.
• Series R07 is not compatible with F105 / F305 / F505(H) series.

Easy-to-service electronics

• Most electronics are housed in an integrated module, easily replaced without special tools or processes.

Coefficient of Friction (COF) Testing Module – NEW

• Measure static and dynamic COF for a wide range of materials, per ASTM D1894 and other relevant standards. Specify the sled weight and configure data collection start and stop triggers. This module can be ordered upfront or enabled in the field via activation code.

Specifications

• Capacity*
  • F105: 100 lbf
  • F305: 300 lbf
  • F505 / F505H: 500 lbf
• Maximum Travel
  • 18.0 in (457 mm)
• Speed Range
  • 0.02-45 in/min (0.5-1,100 mm/min)
• Load Capacity (% of full scale)
  • Test Frame: +/- 0.1%
  • Force sensor along:
    • Series FS05: +/- 0.1%
    • Series R07: +/- 0.15%
• Load Sampling Rate
  • 20,000 Hz
• Data Acquisition Rate
  • 1,000 Hz
• Speed Accuracy
  • +/-0.2% of setting, virtually no variation with load
• Distance Accuracy
  • ±0.002 in [0.05 mm], factory-compensated at up to full load
• Distance Resolution
  • 0.0005 in (0.01 mm)
• Limit Switch Repeatability
  • +/- 0.001 in (0.03 mm)
• Power
  • Universal input 100-240 VAC, 50/60 Hz, 300W
• Fuse Type
  • 1.2 A, 250V, 3AG, SLO BLO
• Weight (test frame only)
  • F105/F305
    • 60lb
  • F505/F505H
    • 70lb
• Shipping Weight
  • F105/F305
    • 75lb
  • F505/F505H
    • 85lb
• Environmental conditions
  • Indoor use only
  • Up to 6,500 ft [2,000 m] above sea level
  • Temperature range: 40 – 95°F [5 – 35°C]
  • Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing
  • Mains supply voltage fluctuations up to ±10 % of the nominal voltage
  • Transient overvoltages up to the levels of Overvoltage Category II
  • Use in environments up to Pollution Degree 2
• Conformance
  • CE
• Included items
  • Control panel, mounting bracket, and hardware (-IMT models only)
  • Mounting bracket, column end (F505H only)
  • USB flash drive containing software installation files (-IM models only)
  • USB dongle (-IM models only)
  • USB cable
  • #10-32M medium hook
  • 5/16-18M large hook
  • #10-32F 2” diameter compression plate
  • #10-32 M/F 2” extension rod
  • #10-32 F/F coupler
  • Adapter, 5/16-18M to #10-32F
  • Set screw, #10-32 x 3/4”
  • Hex nut, #10-32
  • Power cord
  • Allen wrench set
• Warranty
  • 3 years

*Load capacity is reduced at higher speeds, as follows:
– F305: limited to 200 lbF [1 kN] above 24 in [610 mm]/min
– F505 / F505H: limited to 300 lbF [1.5 kN] above 24 in [610 mm]/min

Hardware Options

• Series FS05 force sensor
  • Measure tension and compression forces. Mount directly to the test frame’s crosshead without any cables. Capacities from 0.12 to 500 lbF [0.5 to 2,500 N].

• Series FS06 force sensor
  • Measure tension and compression forces. Rugged s-beam design accommodates bulkier grips and fixtures.
    Capacities from 50 to 500 lbF [250 to 2,500 N].

*Note the MR07 force sensors are not compatible with the F105, F305, F505

Optional Equipment

• Safety Shield (AC1092-2)
  • Provides pinch and sample debris protection for the operator. Includes an electrical interlock, preventing operation while the door is open

• Single Column Extensions (AC1094-1 / -2 / -3)
  • Increase the vertical clearance for tall samples. Multiple extensions may be stacked for very long samples.
  • Three lengths are available – 6, 12 and 24 in [150, 300, and 600 mm].
  • Not compatible with the AC1086 safety shield.

• Double Column Extensions (Ac1095-1 / -2 / -3)
  • Accommodate up to a 20 in. [508 mm] wide sample, or ø21.5 in [ø546 mm] round sample.
  • Three heights are available – 6, 12 and 24 in [150, 300, and 600 mm]. Base contains rows of T-slots for fixture mounting.
  • Not compatible with the AC1086 safety shield.

• USB Hub (AC1093)
  • Test frame-mounted 4-port USB hub improves cable management and conveniently accommodates peripherals, such as a flash drive, barcode scanner, etc. Compatible with all Series F test frames.

• Eye End Adapters
  • Allow for quick grip installation and removal, and prevent grip rotation. Mount to common test frames, load cells, and force gauges.

Download Brochure

Download Manual