Skip to content

Mark-10 Force/Torque Digital Indicator Model 5i

To get a quote or place an order:


  • Have a question about the Mark-10 Force/Torque Digital Indicator Model 5i?

    Ask your question below and our skilled customer service representative will get back to you promptly.

Mark-10 Model 5i Digital Indicator

For use with the following:

  • R01
    • S-Beam force sensor
  • R02
    • Miniature button for sensor
  • R03
    • Inline force sensor
  • R04
    • Miniature S-Beam force sensor
  • R05
    • Fully enclosed smart sensor
  • R06
    • Wire crimp pull sensor
  • R50
    • Universal torque sensor
  • R51
    • Universal torque sensor with interchangeable attachments
  • R52
    • Tool calibration torque sensor
  • R53
    • Closure torque sensor
  • R55
    • High capacity torque sensor

Description

The 5i advanced digital force / torque indicator is designed to work with a wide range of Mark-10 remote force and torque sensors (see below). With exclusive Plug & Test™ technology, all calibration and configuration data is saved within the sensor’s smart connector, not the indicator, allowing for true interchangeability. Sensor password protection prevents use of an unauthorized sensor. In addition, all sensors are fully compatible with the more basic 3i force / torque indicator.

The 5i shares its menu structure and most specifications with Series 5 digital force gauges. The sampling rate is a blazing fast 7,000 Hz, producing accurate results even for quick-action tests. A large, backlit graphics LCD displays large, legible characters, while the simple menu navigation allows for quick access to the indicator’s many features and configurable parameters. Data can be transferred to a PC or data collectors via USB, RS-232, Mitutoyo (Digimatic), or analog outputs.
On-board data memory for up to 1,000 readings is included, as are statistical calculations with output to a PC. Integrated set points with indicators and outputs are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand. An analog load bar is shown on the display for graphical representation of applied force or torque.

The 5i’s averaging mode addresses the need to record the average load over time, while external trigger mode makes switch activation testing simple and accurate.

The 5i includes MESUR™ Lite data acquisition software. MESUR™ Lite tabulates continuous or single point data. Data saved in the indicator’s memory can also be downloaded in bulk. One-click export to Excel easily allows for further data manipulation.

* This Indicator and related sensors replace the Model BGI Force/Torque indicator and associated sensors.*

Features

  • Interchangeable force and torque sensors through Plug & Test technology (sensors sold separate)
  • Sensor password protection, for preventing use of an unauthorized sensor
  • Password protection for individual keys and calibration
  • High-speed 7,000 Hz sampling rate
  • USB, RS-232, Mitutoyo, and analog outputs
  • Large backlit graphic display
  • 1,000-point data memory with statistics (min, max, mean, standard deviation) and outputs
  • Live load bar graph with set point markers
  • Programmable set points, with alarms and outputs
  • Peak readings and set points always displayed
  • Averaging mode – calculates average readings over time
  • External trigger mode – for switch contact testing or remotely stopping display update
  • Automatic data output via USB/RS-232
  • 5 selectable units of measurement
  • Configurable audio alarms and key tones
  • CE mark

 

Specifications

  • Accuracy
    • ±0.1% of full scale
  • Sampling rate
    • 7,000 Hz
  • Power
    • AC or rechargeable battery, Multi-step low battery indicator is displayed, gauge shuts off automatically when power is to low
  • Battery Life
    • Backlight on- up to 7 hours of continuous use
    • Backlight off- up to 24 hours of continuous use
  • Measurement Units
    • lbF, ozF, gF, kgF, N, kN, mN (depends on model)
  • Outputs
    • USB/RS-232- Configurable up to 115,200 baud. Automatic output available up to 250 Hz. Includes Gauge Control Language 2 for full computer control
    • Analog- ±1 VDC, ±0.25% of full scale at capacity
    • General purpose- Three open drain outputs, one input
    • Set points-Three open drain lines
  • Configurable Setting
    • Digital filters, outputs, automatic output (via USB/RS-232), automatic shutoff, default settings, averaging mode, external trigger, passwords, key tones, auto alarms, backlight, calibration
  • Safe Overload
    • 150% of full scale (display show ‘OVER’ at 110% and above
  • Weight
    • 0.7 lbs (0.3kg)
  • Included Items
    • Carrying case, universal voltage AC adapter, battery, quick-start guide, USB cable, resource CD (USB driver, MESUR™ Lite software, MESUR™gauge and MESUR™gauge Plus 90-day trial, and user’s guide), and certificate of calibration
  • Warranty
    • 3 years

Download Data Sheet

Download User Guide

Comparison Chart

Model 5i force / torque indicator is designed for use with Mark-10’s Plug & Test remote force and torque sensors. All calibration and configuration data is saved within the sensors’ smart connectors – not the indicator – allowing for true interchangeability. Each sensor series is available in a range of capacities, from 0.25 to 10,000 lbF (1 N to 50 kN) full scale and from 10 ozFin to 5,000 lbFin (7 Ncm to 550 Nm) full scale. Refer to individual sensor data sheets for further details.

Force Sensors

Torque Sensors

Mark-10 Force/Torque Digital Indicator Model 5i

To get a quote or place an order:


  • Have a question about the Mark-10 Force/Torque Digital Indicator Model 5i?

    Ask your question below and our skilled customer service representative will get back to you promptly.