Mark-10 Motorized Force Tester F755 / F1505 w/EasyMESUR
To get a quote or place an order:
Mark-10 F775 / F755S / F1505 / F505S with EasyMESUR software
Capacities
- F755 / F755S: 750 lbf
- F1505 / F1505S: 1500 lbf
Replacement for the Mark-10 ESM750 and ESM 1500
(fixtures and loadcell in picture sold separate)
Description
Series F test frames with EasyMESUR® are engineered to perform a wide range of tension and compression tests, including break testing, cycling, limit testing to a load or distance, load holding, average force testing, and more.
Set up and run tests, export results, and create a report via the integrated, easy-to-use touchscreen interface – no PC or force gauge required. For unique needs, run the tester from a PC with your own custom application utilizing EasyMESUR®’s serial command library.
Sample setup and fine positioning are a breeze with available FollowMe® force-based positioning – using your hand as your guide, push and pull on the force gauge or load cell to move the crosshead at a variable rate of speed.
Engineered around a modular function platform, the EasyMESUR® run screen can be arranged with large, simple controls – or configured for more advanced applications with a selection of optional functions, including distance measurement, graphing, cycling, and more. Purchase functions and packages at time of order or enable them in the field via activation codes. All testers are shipped in a 160-hour evaluation mode, in which all functions are available.
Generous travel, clearance, and depth dimensions accommodate samples of various shapes and properties. Modular mechanical design accommodates single- and double-column extensions for oversized specimens.
Select from a broad range of force sensor capacities and an expansive array of grips and fixtures.
Features
Rigid and Precise by Design
Exceptionally rigid frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0.006 in / 0.15 mm under any load, at any position.
Stepper motors and controllers drive a ballscrew and linear guideway for smooth, quiet operation, with virtually no speed variation under load.
Limit Switches
Solid-state upper and lower limit switches may be used as test limits or as test exceptions. Dual-graduated rulers aid in switch placement.
Easy-to-Service Electronics
Most electronics are housed in an integrated module, easily replaced without special tools or processes.
Specifications
- Load Capacity
- F755-EM / F755S-EM
- 750 lbf
- F1505-EM / F1505S-EM
- 1,500 lbf
- F755-EM / F755S-EM
- Maximum Travel
- F755-EM / F1505-EM
- 32 in (813 mm)
- F755S-EM / F1505S-EM
- 14.2 in (360 mm)
- F755-EM / F1505-EM
- Standard Speed Range
- 0.5-24 in/min (10-600 mm/min)
- Optional Speed Range
- F755-EM / F755S-EM
- 0.001-60 in/min (0.02-1,525 mm/min)
- F1505-EM / F1505S-EM
- 0.001-70 in/min (0.02-1,800 mm/min)
- F755-EM / F755S-EM
- Load Accuracy (% of full scale)
- Test frame: +/- 0.1%
- Force sensor
- Series FS05: +/- 0.1%
- Series FS06: +/- 0.15%
- Series R07: +/- 0.15%
- Load Sampling Rate
- 5,000 Hz
- Data Acquisition Rate
- 100 Hz
- Speed Accuracy
- +/- 0.2% of setting, virtually no variation with load
- Position Accuracy
- +/- 0.006 in (0.15 mm) at any load or position, factory compensated.
- Distance Resolution
- 0.001 in (0.02 mm)
- Limit Switch Repeatability
- +/- 0.001 in (0.03 mm)
- Overload Protection
- motor stops at 120% of full scale of the force sensor
- Power
- F755-EM / F755S-EM
- Universal input 100-240 VAC, 50/60 Hz, 300W
- F1505-EM / F1505S-EM
- Universal input 100-240 VAC 50/60 Hz, 450W
- F755-EM / F755S-EM
- Weight
- F755-EM: 184 lb (shipping 235 lb)
- F755S-EM: 149 lb (shipping 195 lb)
- F1505-EM: 197 lb (shipping 247 lb)
- F1505S-EM: 157 lb (shipping 205 lb)
- Warranty
- 3 years
- Included with stand
- (1) Control panel, mounting bracket, and hardware
(1) Eye end kit for base
(2) Lock ring for eye end
(2) Spanner wrench
(1) Power cord
(1) Allen wrench set
- (1) Control panel, mounting bracket, and hardware
* Load capacity is reduced at higher speeds, as follows:
– F755 / F755S: limited to 500 lbF [2.3 kN] above 35 in [900 mm]/min
– F1505 / F1505S: limited to 1,000 lbF [4.5 kN] above 60 in [1,525 mm]/min
Optional Functions
- Distance Measurement
- Distance Limits
- Preload
- High Speed
- Low Speed
- Cycling
- Break Detection
- Load Holding
- Follow Me
- Graphing & Reporting
- PC Control
- Coefficient of Friction Measurement –NEW
- Spring Rate Measurement- NEW
Hardware Options
- Series R07 force sensor
- Series MR07 force sensors measure tension and compression forces, and are designed for Series F test frames. Capacities from 50 to 1,500 lbF (250 N to 7.5 kN).
- Series FS05 force sensor
- Requires an AC1083 adapter for use with F755, F755S, F1505, and F1505S Advanced Test Frames. Measure tension and compression forces. Capacities from 0.12 to 500 lbF [0.5 to 2,500 N].
Optional Equipment
- USB cable A to C 6″ (AC1116)
- Connect the EasyMESUR control panel to a PC for file transfer.
- Control panel tabletop mounting kit (AC1085)
- For applications requiring remote use of the control panel. Features an adjustable viewing angle and a base with thru holes for bench mounting.
- Shield (AC1092-1, AC1092-2)
- Provides pinch and sample debris protection for the operator. Includesan electrical interlock, preventing test stand operation while the door is open.
- USB Communication Adapter- NEW
- Connects the EasyMESUR® control panel to a PC for data collection by a third-party application such as SPC software. Data can be transmitted from the control panel via the Data button or requested from the application via serial commands.
