Mark-10 Series FS05 Tension and Compression Force Sensors
To get a quote or place an order:
Mark-10 Series FS05 Tension and Compression Force Sensors
Capacities (12 models):
- 0.12 lbf
- 0.25 lbf
- 0.5 lbf
- 2 lbf
- 5 lbf
- 10 lbf
- 20 lbf
- 50 lbf
- 100 lbf
- 200 lbf
- 300 lbf (temporarily unavailable)
- 500 lbf
Description
Series FS05 force sensors measure tension and compression forces. They mount directly to the crosshead of models F105, F305, F505, and F505H test frames, for a clean, integrated look.
With Plug & Test® technology, all configuration and calibration data is saved within the sensor, allowing it to be calibrated on the test frame or off-site with a Mark-10 indicator (optional adapter AC1083 required). Ranges available from 0.12 to 500 lbF [0.5 N to 2.5 kN].
Note:An AC1083 adapter is required to use FS05 force sensors with the following test frames: F755, F755S, F1505, and F1505S.
Features
- Mount directly to crosshead of models F105, F305, F505, and F505H without any connection cables
- Member of the Plug & Test® family of interchangeable sensors and indicators (adapter required)
- Measure tension and compression force
- NIST-traceable certificate of calibration with data is included
- CSC can supply an ISO17025 calibration cert
- Warranty: 3 years
Specifications
- Accuracy
- +/- 0.1% of full scale + indicator or test frame
- Safe Overload
- 150% of full scale
- Weight
- From 1.9 to 3 lb (0.9 to 1.4 kg)
- Included items
- Extension rod
- Cone
- Chisel
- V-groove
- Flat
- Hook
- Coupling (FS05-50 to FS05-500 sensors only)
Optional Equipment
- Adapter FS05 sensor (AC1083)
- Adapter, FS05 sensor / PTAF adapter, to Plug & Test® connector / F755, F755S, F1505, F1505S test frames, 10 in / 250 mm cable
- Extension cable (AC1084)
- 48 in. / 1,220 mm extension facilitates easier connection to a Model M5I or M7I indicator for calibration.