Mark-10 TSFM Motorized Test Stand, 500LBf Capacity

To get a quote or place an order:


  • Have a question about the Mark-10 TSFM Motorized Test Stand, 500LBf Capacity?

    Ask your question below and our skilled customer service representative will get back to you promptly.

To be discontinued March 31, 2018. Replaced by Model ESM750S

The TSTM Motorized Force Measurement Test Stand is a versatile and precise testing solution for most compression and tensile testing applications up to 500 lb. It can accept a wide variety of sample shapes and sizes and can be configured in many positions due to modular design.

Description

The TSTM Motorized Force Measurement Test Stand is a versatile and precise testing solution for most compression and tensile testing applications up to 500 lb. It can accept a wide variety of sample shapes and sizes and can be configured in many positions due to modular design.

Speed is adjustable in up and down directions and a remote control unit provides added safety during testing. Other features include a manual fine adjustment knob and a stepper motor that prevents speed variation with load, making testing precise and repeatable. Use this test stand with any Mark-10 force gauge and grips to create a complete testing solution.

Motorized Tension / Compression Test Stand:

  • Maximum force: 500 lb [2.5kN]
  • Maximum travel: 4″ [101.6 mm]
  • Speed range: 0.2-6 in/min [0.2-150 mm/min]
  • Speed accuracy: ±2% of setting, ±0% variation with load
  • Loading table with 25 #10-32 threaded holes for fixture mounting
  • Set of upper and lower adjustable solid state limit switches. Repeatable to within 0.001″ [0.03 mm].
  • Universal power supply: 80-250 VAC
  • Manual travel knob
  • Mounting holes for bench mounting
  • Base may be removed for alternative mounting
  • Compatible with Mark-10 force gauges, accessories and grips
  • CE mark

Optional Equipment

  • A wide range of force gauges and gripping fixtures
  • Digital travel display
    • 6″ [152 mm] travel, 0.0005″ [0.01 mm] resolution, SPC output for automated data collection. For output of travel data to a PC, the following items are required: 09-1066 cable and MRS100A communication adapter. Note: continuous data output rate is limited to 2 Hz..
  • Horizontal  / wall mounting kit
    • Pair of mounting legs for adapting the test stand to a bench, instead of the base.
  • Multi-functional cable, gauge to controller
    • Connects a Series 4, 5, or 7 force gauge to the controller. This single cable is used to transmit set points, overload signals, and force data.
  • Serial cable, controller to PC
    • Bi-directional communication with a PC for computer control. Also sends force data from the controller to a PC.
  • RS-232 to UBS adapter
    • Converts RS-232 to USB output. Includes USB cable and installation CD.

Download Data Sheet

Mark-10 TSFM Motorized Test Stand, 500LBf Capacity

To get a quote or place an order:


  • Have a question about the Mark-10 TSFM Motorized Test Stand, 500LBf Capacity?

    Ask your question below and our skilled customer service representative will get back to you promptly.