Mecmesin Digital Torque Tool Tester Alluris TTT-300 Series

To get a quote or place an order:


  • Have a question about the Mecmesin Digital Torque Tool Tester Alluris TTT-300 Series?

    Ask your question below and our skilled customer service representative will get back to you promptly.

Mecmesin Alluris Digital Torque Tool Tester

Capacity (5 models)

  • 0.2-2 Nm
  • 0.5-5 Nm
  • 1-10 Nm
  • 2.5-25 Nm
  • 5-50 Nm

Description

The TTT-300 range of Torque Tool Testers enables the verification of torque devices quickly and conveniently at their point-of-use, such as in the workshop or next to the production line. They can be used for checking manual wrenches & screwdrivers as well as electrically-powered torque tools.

5 models are available in the TT-300 range to cover the most common working capacities of hand torque tools:  0.2 – 2N.m, 0.5 – 5N.m, 1 – 10N.m, 2.5 – 25N.m and 5 – 50N.m

Each tester can be configured to display in one of 4 different modes:

Standard:  displays the live torque reading in both clockwise (CW) and  counter-clockwise (CCW)
Peak CCW: captures and displays the first ‘click torque’ peak and the second ‘maximum torque’ – in CCW only
Peak CW: captures and displays the first ‘click torque’ peak and the second ‘maximum torque’ – in CW only
Peak Actual: displays the currently applied torque whilst also capturing the maximum torque values in both CW and CCW

The Quick-Check function is particularly useful. It allows 5 consecutive measurements to be stored automatically and takes the average of the 5 peak readings. This can then be compared to assigned tolerance limits and the tester can indicate a pass/fail with LED status for instant classification for operators.

The TTT-300 features internal memory for storing torque readings and can clearly display the statistical information from all measurements. The USB interface allows the data to be exported to external applications, e.g. to SPC (Statistical Process Control) systems.

The TTT_Certify software is included as standard, enabling the tester to be used for the calibration of torque tools according to the requirements of ISO 6789 and to generate a calibration certificate for the tool in PDF format.

Ruggedly built for tough working environments; its steel case can be screwed to bench tops and the torque cell is overload-protected to minimize the risk of accidental damage.

The TTT-300 comes supplied with standard adapters to suit common torque tool heads. Run-down fixtures are also available for motor-driven torque tools up to 10N.m. A horizontal test stand for securing torque wrenches (TTT-920) and a vertical stand for fixing torque screwdrivers (TTT-921) can be added to complete the tester as a fully-comprehensive torque tool testing station.

 

Features

  • Quick check of torque tools
    • for manual and motorized torque drivers.
  • Automatic capture of two peaks
    • for testing peak at click point and the following maximum.
  • Limit value monitoring
    • with pass/fail detection for both peak values.
  • Calibration of torque tools according to ISO 6789
    • for manual screwdrivers and torque wrenches.

 

Specification

  • Accuracy
    • +/- 0.5% of full scale
  • Acquisition Rate
    • 1000 times per second
  • Operation Modes Standard
    • Realtime values
  • Peak (click + peak 2)
    • First click-torque and second peak
  • Quick Check
    • Five consecutive measurements with calculations of the arithmetic average
  • Limit
    • Separately selectable upper and lower tolerance limits protection
  • Rating
    • IP42 (protected against dripping water)
  • Output
    • via USB 2.0 interface
  • Supplied with
    • TTT300 Torque Tool Tester c/w 3/8″ female socket, adapters for 3/8″ and 1/4″ male square, adapters for 5/16″, 1/4″ and 5/32″ female hex, USB interface cable, CD-ROM with TTT Certify software, quickstart operation manual.

 

Download Spec Sheet

Mecmesin Digital Torque Tool Tester Alluris TTT-300 Series

To get a quote or place an order:


  • Have a question about the Mecmesin Digital Torque Tool Tester Alluris TTT-300 Series?

    Ask your question below and our skilled customer service representative will get back to you promptly.