Mecmesin Motorized Force Tester Multitest-dv (AFG)
To get a quote or place an order:
Mecmesin Multitest-dv Force Tester (used with AFG)
Capacities (3 models)
- 0.5 kN (110 lbf
- 1 kN (220 lbf)
- 2.5 kN (550 lbf)
* AFG is sold separate
The MultiTest-dV is a superior motorized force tester offering outstanding value. Designed for precision-controlled compression and tension testing the MultiTest-dV’s simple controls, backed by sophisticated electronics, make it the ideal choice for a wide range of routine testing.
It improves greatly on the variability encountered with manual testers where tension and compression are applied by hand at varying speeds. By applying force at a constant speed, whilst gripping the sample in a uniform manner, the motorized MultiTest-dV significantly enhances the repeatability of test results.
Operators can perform routine batch testing with excellent throughput, minimizing testing time, and benefiting from the convenience associated with these motorized tensile testers.
The MultiTest-dV can be configured at two levels:
Test to a target displacement limit or, when using any one of the Mecmesin range of Advanced Force Gauges (AFG), to a load limit or break.
Add VectorPro™ Lite software to a MultiTest-dV with AFG, for data acquisition, plotting of graphs, calculation of results, plus reporting and exporting of test data.
Sophisticated- See Multitest-dv (ELS)
Fit a dedicated ELS loadcell and connect up to VectorPro MT software to use your MultiTest-dV as an entry-level materials tester.
Control your whole test sequence with simple, step-by-step programs. Perform both standard calculations like peak, load at displacement and more complex calculations such as Youngs Modulus, and offset yield strength.
The MultiTest-dv is a versatile single-column, motorized tester designed for ease-of-use by operators of all levels. There are 3 models in the range with ratings of 0.5 kN, 1 kN and 2.5 kN and offering a crosshead travel up to 1200 mm (47″).
Each occupies minimal bench space and are ideal for applying tensile and compressive forces in a variety of applications.
It delivers superior performance via its control panel and multi functional control wheel, which allows the precise selection of test parameters such as speed and target force/displacement. Colored LEDs clearly indicate the machine status during testing and operators can effortlessly follow the progress of the test from the force & displacement panel.
For more in-depth recording and analysis of test data, the MultiTest-dV can be connected via its USB output port to VectorPro Lite advanced data-acquisition and plotting software package.
Adjustable safety limit switches are fitted to ensure that specimens cannot be stretched too far or grips crushed together.
The MultiTest-dV is fitted with a dovetailed crosshead for quick and easy interchange of force gauges or loadcells. Grips and fixtures can be rapidly fitted to the anvil plate which is pre-drilled with threaded holes for easy connection.
With each model weighing around 25 kg (55 lbs) its compact design and small footprint make it an ideal bench-top tester for use in the quality-control laboratory or production area.
The Advanced Force Gauge (AFG) is a self-contained device comprising an internal loadcell and its own display.
There are 10 models ranging in capacity from 2.5 to 2500 N (0.5 – 500 lbf) each featuring an impressive measurement accuracy of ±0.1% of full-scale.
The AFG is positioned on the crosshead of the test frame via a dovetailed fixing and continuously measures & displays tension/compression, whilst simultaneously capturing the maximum peak readings in the background.
When the AFG is connected to the MultiTest-dV via an interface cable it can transfer the displayed ‘live’ load reading to the front panel and perform basic control of the test. This is achieved by configuring settings within the AFG to send a signal to the test frame to ‘stop’ or ‘stop and reverse’ when a load limit or specimen break is detected.
Tension and compression values obtained by the AFG can be transmitted directly to a PC or printer for the recording of results.
Alternatively, force readings are combined with displacement readings within the MultiTest-dV and sent to the USB output port to create a data-package, which is accessed by VectorPro Lite software for plotting graphs, calculation of results and creation of test reports.
Holding your test specimen in place without it slipping is essential to obtaining repeatable results. Mecmesin have an extensive range of grips and fixtures to hold a variety of components and materials. They include wedge grips and vice grips for tensile testing, compression plates and bend jigs, friction tables plus many more.
- 3 models
- 0.5 kN, 1.0 kN, 2.5 kN
- 4 test modes
- manual up/down control
- to or between target displacement
- to or between limit switches
- to or between pre-set gauge loads
- Versatile and precise
- crosshead speed from 0.1-1200 mm/min
- positional resolution to 0.001 mm
- USB Connection
- Connect to a PC with VectorPro™ Lite
software, for test settings and results
storage, streaming data, graph plotting,
calculations, and basic statistics.
- Connect to a PC with VectorPro™ Lite
- Crosshead travel
- 1186 mm/46.7″ (0.5 kN)
- 986 mm /38.8″ (1 kN)
- 507 mm /20″ (2.5 kN)
- 64″ (0.5 kN)
- 56″ (1 kN)
- 37″ (2.5 kN)
- 57 lbs (0.5 kN)
- 55 lbs (1 kN)
- 53 lbs (2.5 kN)
- +/- 1% of full scale
- Included items
- bracket for mounting AFG to stand
- Interlock override plug
- Allen key for tightening gauge bracket to crosshead
- mains cable