Description

The 1350 Series TD Digital Torque and Angle Torque Drivers bring a new level of torque control and accuracy to your low torque applications.

Features and Specifications

• The 1350 Series TD is compatible with the Global 400 and Global 400mp controllers.
• Meets/exceeds ASME B107.300-2010 and ISO 6789
• Clockwise Torque: +/- 2% of the Indicated Value from 20% to 100% of rated capacity, +/- 4% of the Indicated Value from 5% to 19% of rated capacity.
• Counterclockwise Torque: +/- 4% of the Indicated Value from 20% to 100% of rated capacity, +/- 6% of the Indicated Value from 5% to 19% of rated capacity.
• Comes in two torque capacities:
  • The 80 inch-pound driver range is 4 to 80 inch-pounds.
  • The 100 inch-ounce driver range is 5 to 100 inch-ounces.
• All torque and angle settings are set using the Global 400 or Global 400mp. Error proofing feature: parameters cannot be set using the buttons on the torque screwdriver. This prevents any inadvertent P-Set changes and protects your assembly process integrity.
• You can pair this tool with multiple P-Sets at different torque or torque and angle values because it is a digital tool. This can be used to replace multiple preset tools.
• TAM function (Torque and Angle Monitoring) provides you with “double hit” protection. If a fastener reaches torque without the required degrees of rotation the fastener is rejected as non-compliant.
• Torque and angle functionality can also alert the operator if a gasket or washer is missing because it shows changing joint conditions.
• The display backlight is visible when torque is applied. Displays the torque and angle value on the digital display on the screwdriver.
• Visible from any angle, the light band on the driver turns yellow, then green, the driver beeps, and the body vibrates when target torque is achieved.
•  The female hexagon version, as well as the male square drive version, gives you the flexibility to meet all of your torque driver application needs.
•  ESD Compliant when the grounding strap is properly worn.
• XBee radio 2.4 GHz – 12 broadcast channels to optimize radio connectivity.
• Powered by 1 AA NiMH rechargeable battery. The TD ships with two NiMH rechargeable batteries.
• Chargers are sold separately.
• Recommended for the 10770 and the 10771: best use with the L-Grip handle to assist in effortlessly reaching the 80 inch-pound capacity. DO NOT use the L-Grip with the 100 inch-ounce model. You will over-torque the tool. Over-torquing the tool can cause damage and void the warranty.
• L-Grip handles (PN# 10769) are available for separate purchase and are NOT included with the tool. 
• Password protected
• Units of measure: in-oz, in-lb, ft-lb, cNm, NM, cmkg
• Modes of operation: Peak, TAM, T2A, Residual
• Comes with a Certificate of Calibration from our ISO 17025 Accredited Lab.
• Our calibration lab is accredited in both torque and angle.

Whats Included

• Torque driver
• two NiMH AA rechargeable batteries (only 1 needed for use)

Optional Equipment

• Charger
  • 4 Slot battery charger (p/n 10740)
  • 8 Slot battery charger (p/n 10741)
• L-Grip (p/n 10769)
  • Recommended for the 80 in.oz: best use with the L-Grip handle to assist in effortlessly reaching the 80 inch-pound capacity.
    • Do not use with the 100 in.oz model

Download Manual