Tohnichi Interchangeable Heads

To get a quote or place an order:


  • Have a question about the Tohnichi Interchangeable Heads?

    Ask your question below and our skilled customer service representative will get back to you promptly.

Tohnichi Interchangeable Heads

For:

  • CSP
  • BCSP
  • CL/CLE
  • CL-MH
  • YCL
  • PCL
  • QLLS/CLLS/PQLLS/PCLLS/TiQLLS

Description

SH- Open Wrench Head

  • SH open heads can be used for piping tasks that do not permit the use of sockets or ring heads. Inch Size also available.

SH-N- Open End with Notch Head

  • SH-N models: The notch creates speed in the tightening process by grasping the side of the fastener without removing the wrench. This reduces the possibility of error-tightening.

AH- Adjustable Open End Head

  • The mouth width of AH adjustable open end heads can be adjusted, so there’s no need to keep SH interchangeable heads on hand for each separate mouth width. This is especially convenient when working with hydro-pneumatic piping, for maintenance, and for torque control with inch-standard bolts.

PH- Pipe Wrench Head

  • With an ordinary wrench, applying torque control on piping or reinforcing screws and bolts may encounter wrench slippage because of the abscence of widths across flats. But with a PH pipe wrench head clamping is robust, facilitating torque control.

RH- Ring Head

  • RH ring heads do not separate from bolt heads easily, making tasks safer and more accurate. Inch Size also available.
  • (Note)RH8D X 5.5~7 are hexagonal.

QH- Ratchet Head

  • QH ratchet heads have a small tightening radius to facilitate effective tightening in cramped areas. The square drive QH10D-1/4, QH15D-3/8 and QH22D-1/2 models are one size smaller than the regular models, so their sockets are cheaper.

RQH- Female Ratchet Head

  • RQH female ratchet heads can be used for effective tightening in areas where vertical space is limited.

DH- Square Drive Head

  • DH square drive heads are standard interchangeable heads, and are useful when tightening many different types of bolts having the same shape, using the same torque wrench. It is best to possess one set. Use them with sockets for tightening. Reasonably priced.

HH Hex Head

  • The HH hex head is to be used for hex socket bolts (cap screws). To be used with hex key inserted.

FH- Hook Head

  • FH hook heads are interchangeable heads ideal for bearing locknut applications.

 

Download Spec Sheet

Tohnichi Interchangeable Heads

To get a quote or place an order:


  • Have a question about the Tohnichi Interchangeable Heads?

    Ask your question below and our skilled customer service representative will get back to you promptly.